NCP Acrylic Sealer 30%
INSTRUCTIONS:
ALWAYS USE GOOD VENTILATION WHEN USING ACRYLIC
30%.
ALWAYS USE GOOD VENTILATION WHEN USING ACRYLIC
30%.
1. Acrylic 30 may be applied by brush, roller, or pump up sprayer. Apply a thin uniform coat at the rate of approximately 400 ft2 (40 m2) per gallon.
2. Allow coating to dry for 4–6 hours and apply a second coating for maximum durability. Allow to dry at least 24 hours before allowing foot traffic. (Equipment may be cleaned with Xylene or lacquer solvent)
2. Allow coating to dry for 4–6 hours and apply a second coating for maximum durability. Allow to dry at least 24 hours before allowing foot traffic. (Equipment may be cleaned with Xylene or lacquer solvent)
$154.95
